A recently founded company. Leading Company in the field of mechanics and mechanics working process. The main objective of the company is the re-establishment and continuation of the prestigious brand ITM. The ITM brand has been available since 1981 on the market and is highly appreciated and well-known for the production of warm air heaters and dehumidifiers. Located near the lake Garda and close to an important motorway junction (A4/A22).
how many kw do you need?
•Metal structure painted with epoxy powders
•Selector switch to permit the use of the machine at two heating levels and with the possibility to use the fan only
•Ambient thermostat for temperature setting
•Safety thermostat for machine protection
•Armoured element inox
•Motor with thermal protection
•Cable and plug included on all models
•Technical characteristics
•Stainless steel structure with aluminium frame
•Stainless steel fire box with pipes-system heat exchanger
•Centrifugal fan
•Fan limit thermostat to control pre and post ventilation with the possibility to select functions fan only or heating
•Suitable for more than 12 meters ducting
•Efficiency up to 91%
•Metal structure painted with epoxy powders
•Stainless steel fully proof combustion chamber
•Electronic flame check with photo-resistance and equipment
•Safety thermostat for excess temperature
•Post-ventilation device for combustion chamber cooling
•Efficiency up to 90%
•Pre-set for ambient thermostat
•Suitable for max. 12 meters ducting with standard conveyor and spiral pipe kit
•Suitable for closed environments
•Hanging models for fixed use
•Stainless steel structure with aluminium frame
•Stainless steel fire box with pipes-system heat exchanger
•Helical fan (E) or Centrifugal fan (C)
•Fan thermostat for fire box cooling
•It is possible to duct the air flow discharge for a maximum of 12 meters (E) – over 12 meters (C)
•Turning eye with adjustable fins
•Metal structure painted with epoxy powders
•Piezoelectric ignition (M)
•Safety device using thermocouple and thermostat (M)
•Electronic check device (E)
•Flame safety check
•Motor with thermal protection
•Power delivery control
•Suitable for open or semi-open environments
•Metal structure painted with epoxy powders
•Burner in stainless steel
•Flame safety is checked using an electronic device
•Motor with thermal protection
•Power delivery control
•Suitable for open or semi-open environments
•Metal structure painted with epoxy powders
•Burner in stainless steel
•Flame safety is checked using a thermostat thermocouple and solenoid valve
•Piezoelectric ignition
•Power delivery control
•Motor with thermal protection
•Suitable for open or semi-open environments
•Metal structure painted with epoxy powders
•Burner in stainless steel
•Control box in thermoplastic material with degree of insulation IP 44
•Flame safety is checked using a thermostat thermocouple and solenoid valve
•Piezoelectric ignition
•Motor with thermal protection
•Suitable for open or semi
•Open environments
•Metal structure painted with epoxy powders
•Stainless steel fire box
•Electronic flame check with photo-resistance
•Post-ventilation device for combustion chamber cooling
•Safety thermostat for excess temperature
•Suitable for open or semi-open environments
•Pre-set for ambient thermostat
•Models 60-80-105 available also hanging
•Metal and tubular structure painted with epoxy powders
•Direct heat flow without air moving
•Odourless combustion
•Ceramic-fibre combustion chamber
•Electronic flame check with photo-resistance
•Post-ventilation device for combustion chamber cooling
•Possibility to use an ambience thermostat
•Thermoplastic tank
•Vertically adjustable dish.
•Fuel: kerosene/diesel oil
•Stainless steel structure with aluminium frame
•Stainless steel fire box with pipes-system heat exchanger Helical fan
•Fan limit thermostat to control pre and post ventilation with the possibility to select functions fan only or heating
•Suitable for max. 12 meters ducting
•Efficiency up to 91%
•Metal structure painted with epoxy powders
•Stainless steel fully proof combustion chamber
•Electronic flame check with photo-resistance and equipment
•Safety thermostat for excess temperature
•Post-ventilation device for combustion chamber cooling
•Efficiency up to 90%
•Pre-set for ambient thermostat
•Suitable for max. 12 meters ducting with standard conveyor and spiral pipe kit
•Suitable for closed environments
•Metal structure painted with epoxy powders
•Stainless steel fire box
•Electronic flame check with photo-resistance
•Post-ventilation device for combustion chamber cooling
•Safety thermostat for excess temperature
•Model 15 portable
•Models 20-30-40-50 trolley-mounted
•Suitable for open or semi-open environments
•Pre-set for ambient thermostat
•Diesel oil gear pump
0
•Structure with aluminium frame and painted steel panels
•Stainless steel fire box with pipes-system heat exchanger
•Centrifugal fan (C)
•Fan limit thermostat to control pre and post ventilation with the possibility to select functions fan only or heating
•It is possible to duct the air flow discharge
•External use version available
•Fixed space heaters coupling with diesel oil burner or methane or L.P.G.
Please don't hesitate to contact us for more information about products
